JVC CA-HXC6 - Manual (Page 12)

9
Listening to the Radio
To select the band (FM/AM)
To tune in to a station
While FM or AM is selected...
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
To stop searching manually, press either button.
If the received FM station is hard to listen
To preset stations
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
2
Enter into the presetting mode.
3 Select a preset number for the station you store.
4 Store the station.
To tune in to a preset station
1 Select the band (FM or AM).
2 Select a preset number for the station you store.
• You can also use the PRESET +/– control on the unit.
To save the power consumption while on
standby—Eco mode
While on standby...
The display illumination (including the display
demonstration) disappears.
The MONO indicator lights on the
display. Reception will improve though
stereo effect is lost—monaural reception
mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
Main Unit
ONLY
ECO
Canceled
FM
AM
2 sec.
Increases the frequencies.
Decreases the frequencies.
Remote
ONLY
Examples:
To select preset number 5,
press 5.
To select preset number 15,
press +10, then 5.
To select preset number 30,
press +10, +10, then 10.
Remote
ONLY
FM
AM
HX-C6[J]-f.book Page 9 Monday, March 7, 2005 3:28 PM