JVC CA-HXC6 - Manual (Page 6)

3
Getting Started
Step 1 : Unpack
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.
Step 2 : Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
Step 1 :Unpack the package and
check the accessories.
Step 2 : Prepare the remote control.
Step 3 : Hook up the components such
as AM/FM antennas, the
speakers, etc.
Finally plug the AC power cord.
Now you can operate this System.
• DO NOT use an old battery together with a
new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to
use the remote control for an extended
period of time. Otherwise, the remote
control will be damaged from battery
leakage.
3
2
1
R6(SUM-3)/AA(15F)
HX-C6[J]-f.book Page 3 Monday, March 7, 2005 3:28 PM