Jensen Hello Kitty KT7015A - Manual (Page 29)

90°
180° Rotate
270°
Yes
Slideshow
No
Yes
Print
No
Setup menu:
The same as Capture mode.
◆ Menu operation
Main operations are the same as those of capture mode menu.
“Set Logo”, “Rotate” and “Print” are only valid to pictures.
Set Logo: using the option can set current photo as switch-on image. To cancel the set
switch-on image, choose one image in playback mode and then press MENU key to open the
playback menu, choose “Set Logo” submenu, choose “No”, then press OK key to confirm.
When the camera is switched on a second time, the switch-on image will be restored to be
default image.
Print: In the playback mode, choose the picture to be printed, press MENU key to open the
menu and choose “Print”. Press Right direction key to enter “Print” submenu, choose “Yes” and
press OK key to confirm. Within 5s, use USB cable to connect the printer supporting PictBridge
protocol (the printer has the mark of
) to start printing.
29
Tip: When the menu turns gray, it indicates that this menu cannot be used in the current state.