GE RM24926 - Manual (Page 12)

12
Using Your Remote, cont.
Sleep Function
The Sleep button enables the remote to turn off your
TV after a period of 1 to 99 minutes as shown below.
The remote must be in TV mode to set a Sleep Timer.
This feature works even if your TV does not have a
sleep feature.
1. Press and release the TV device button.
2. Press and hold the Sleep button until the
LED remains lit (about 2-3 seconds).
4. Press and release the
numeric buttons (01-99)
for the time required.
The LED will blink off to
indicate button press
acceptance.
5. TV Sleep Timer is set.
6. Leave the Remote pointing towards the TV with
an unobstructed path.
To cancel the Sleep Timer, press and hold the Sleep
button until the LED blinks, or press and release the
Power button in TV mode.
3. Release the Sleep button.