JVC CA-UXE15 - Manual (Page 18)

15
To show Radio Data System
signals on the display
Select an FM station with Radio Data System
signals.
If a station contains the signals,
“PS” appears on
the display.
PS (Program Service):
While searching,
“PS” alternately appear on the
display. Then, the station name appears. “NO PS”
appears if no signal is sent.
PTY (Program Type):
While searching,
“PTY” alternately appear on
the display. Then, the broadcast program type
appears.
“NO PTY” appears if no signal is sent.
RT (Radio Text):
While searching,
“RT” alternately appear on
the display. Then, the text message sent by the
station appears.
“NO RT” appears if no signal is
sent.
Station Frequency:
The frequency of the selected station appears on
the display.
memo
• If searching fi nishes at once, “PS”, “PTY” and
“RT” will not appear on the display.
• If you press DISPLAY MODE while listening to
an AM (MW) station, the display only shows
station frequency.
On characters displayed
When the display shows PS, PTY or RT text,
the display cannot show accented letters; For
example,
“A” may represent accented “A’s” like
“Б, В, Г, А, Д and Å”.
To search for a program by the PTY codes
One of the advantages of the Radio Data System
service is that you can locate a particular kind of
program by specifying the PTY codes.
To search for a program using PTY codes:
1 While listening to an FM station, activate
PTY search.
2 Select a desired PTY code while “SE-
LECT PTY” is blinking.
Each time you press the button, the display
shows a PTY category in the following order:
NEWS Q AFFAIRS Q INFO Q SPORT Q EDUCATE
Q DRAMA Q CULTURE Q SCIENCE Q VARIED
Q POP M Q ROCK M Q EASY M Q LIGHT M Q
CLASSICS
Q OTHER M Q WEATHER Q FINANCE
Q CHILDREN Q SOCIAL Q RELIGION Q PHONE
IN
Q TRAVEL Q LEISURE Q JAZZ Q COUNTRY Q
NATION M Q OLDIES Q FOLK M Q DOCUMENT
Q TEST Q ALARM Q NEWS
3 Start searching while the selected PTY
code is blinking.
While searching, “SELECT PTY” and the selected
PTY code (ex. NEWS) alternately appear on the
display.
The unit searches the 30 preset stations and
stops when it fi nds a station of the selected
category, then tunes into that station. The Radio
Data System indicator turns on.
To continue searching after the fi rst stop, press
PTY SEARCH again within 5 seconds while the
selected PTY code is blinking.
PTY PS RT
Station Frequency