JVC XV-M5GSL - Manual (Page 11)

Basic operations
9
XV-M5GSL/LET0236-001A/English
B
a
si
c
operations
5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
6
Press
5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the unit to an
external surround decoder or D/A converter. (If you do not
connect the unit to such a device, you do not have to set this
item.)
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a DTS decoder, select [STREAM/
PCM].
• When connecting to other digital device, select [PCM
ONLY].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP
display appears.
Basic playback
Inserting discs
1
Press 0 (open/close) on the right of the disc
tray you want to open.
2
Place a disc in the disc tray.
3
Press 0 (open/close) located on the right of
the disc tray.
Hint
You can insert or remove the disc by pressing 0 (open/close) for
a disc tray which is not in use for playback while a disc in the
other tray is being played, without interrupting playback.
Using the OPEN/CLOSE button on the remote
control
You can open and close the disc trays by using the OPEN/
CLOSE button on the remote control in the following ways.
To open the current disc tray
In stop mode, press OPEN/CLOSE, and the current disc tray
opens.
• To check the current disc number, press ON SCREEN to bring
up the status bar (see page 11).
To remove the disc currently being played
During playback, press OPEN/CLOSE, and the disc tray
containing the disc currently being played opens.
To open the desired tray that contains a disc
1 Press DISC SELECT.
2 Press the numeric buttons (1 to 5) to designate the disc tray
you want to open.
3 Press OPEN/CLOSE.
NOTES
• You cannot use DISC SELECT and the numeric buttons to open
the disc tray whose disc indicator is not lit.
• If you use DISC SELECT and the numeric buttons to designate
a disc tray, or press 0 (open/close) for a disc tray which is not in
use for playback while another disc tray is open, the disc tray
will be closed.
To change the brightness of the display window
Press DIMMER on the remote control unit.
You can select the display window brightness from three levels.
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM
ANALOG DOWN MIX DOLBY PROLOGIC
D RANGE CONTROL ON
OUTPUT LEVEL
DVD PLAYER SET UP
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DIGITAL AUDIO OUTPUT options
PR OG RES SIV E
• To insert an 8-cm disc, place it in the inner recess.
With the label side up
XV-M5GSL(J).book Page 9 Monday, May 26, 2003 9:31 PM