Preparations, C connecting to a tv with component jacks, Progressive scan video playback available – JVC XV-M5GSL User Manual

Page 6: About the scanning mode

Advertising
background image

Preparations

4

XV-M5GSL/LET0236-001A/English

P

rep

a

rations

C Connecting to a TV with component jacks

You can enjoy picture of high-fidelity color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the unit to
your TV.

NOTES

• Connect “Y” to “Y,” “P

B

” to “P

B

” (C

B

), “P

R

” to “P

R

” (C

R

) correctly.

• When using the COMPONENT VIDEO OUT jacks, do not

connect the S-VIDEO output jack on the unit.

• If your TV has component video input jacks of BNC type, use an

adapter which converts a pin jack to a BNC jack (not supplied).

Selecting the 480i/480p/REMOTE selector position
• If your television equipped with component jacks does not

support the progressive scanning mode
Set the 480i/480p/REMOTE selector to “480i.”

• If your television equipped with component jacks supports the

progressive scanning mode
Set the 480i/480p/REMOTE selector to “480p.”

• If you want to select the scanning mode between the interlace

and progressive modes (depending on the source condition, or
when connecting more than one television, etc.)
Set the 480i/480p/REMOTE selector to “REMOTE.”
Thus you can select the mode from the remote control unit.

NOTE

You must change the 480i/480p/REMOTE selector position while
the unit power is off. Otherwise, the changed setting is not
effective.

Activating the Progressive scanning mode using the remote
control unit
When the unit is turned on and the 480i/480p/REMOTE selector
is set to “REMOTE,” press and hold down VFP - PROGRESSIVE
SCAN for a few seconds.
The scanning mode switches between the Progressive scanning
and Interlaced scanning modes.

When the scanning mode is set to the Progressive mode, the
PROGRESSIVE indicator on the front panel turns on.
Depending on the [PICTURE SOURCE] setting on the
[PICTURE] preference display and whether the current DVD
VIDEO disc is film-source or video-source, the color of the

indicator differs, as shown in the table below.

* While stopped in the Progressive scanning mode, the

PROGRESSIVE indicator is lit in red regardless of the
[PICTURE SOURCE] selection.

NOTES

• The Progressive scanning mode works only when you connect

the unit’s COMPONENT VIDEO OUT jacks to your TV.

• There are some progressive TV and High-Definition TV sets

that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.

• All JVC progressive TV and High-Definition TV sets are fully

compatible with the unit (Example: AV-61S902).

• The VIDEO jack, S-VIDEO jack and COMPONENT VIDEO

OUT jacks cannot be used at the same time. Connect cable(s)
only to the jack(s) you want to use.

Progressive scan video playback available

In the Progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.

About the scanning mode

Depending on the material source format, DVD VIDEO discs
can be classified into two types; film source and video source
(note that some DVD VIDEO discs contain both film source
and video source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are recorded
as 30-frame-per-second (60-field-per-second interlaced)
information.
When the unit plays back a film source material, uninterlaced
progressive output signals are created using the original
information. When a video source material is played back, the
unit interleaves lines between the interlaced lines on each to
create the interpolated picture and outputs as the progressive
signal.

RIG

HT

LEF

T

AUD

IO

VIDEO

S-VIDEO

IN

Y

P

B

P

R

CO

MPONENT IN

Y

P

B

P

R

RIG

HT

LEF

T

AUD

IO OUT

COMP

ONEN

T

VID

EO

S-V

IDE

O

VID

EO

OUT

COAXIA

L

OPT

ICA

L

PCM

/STRE

AM

DIGIT

AL

OUT

AV COM

PU

LINK

480i

480

p

REM

OTE

480i

480p

REMOTE

The unit

Blue

Red

Green

White

Red

Red

Audio cable (not supplied)

Component video cable
(not supplied)

Red

Blue

Green

TV

White

Setting of
[PICTURE SOURCE]

Source type of DVD VIDEO

Film source

Video source

AUTO

Green

Red

FILM

Green

Green

VIDEO (NORMAL)/
(ACTIVE)

Red

Red

XV-M5GSL(J).book Page 4 Monday, May 26, 2003 9:31 PM

Advertising