JVC HD-61G587 - Manual (Page 54)

54
Button Functions
Turns the monitor on or off.
Press the P OWER button
Note:
• After turning the power on, you can not turn the power off for about one minute.
Power
Use the number buttons on the remote control to input the password for V-Chip.
Number Buttons - 10Key Pad
Set
Selects the signal input source for the monitor: VIDEO-1, 2, 3, 4 or DIGITAL-IN for video
devices like VCRs, DVD players or camcorders.
Press the I NPUT button
By every press of the I NPUT button, you can change the input mode.
Notes:
• You can also access by pressing the I NPUT button on the side of the monitor instead of the
remote control.
• If you have a PC connected to the monitor, select VIDEO-3.
Input
Use the S ET button when setting the search code.
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the T HEATER P RO button
TheaterPro D6500K
Use these buttons to move up or down all the menus when a menu screen is displayed.
Note:
• The C HANNEL +/– buttons can be used to operate cable or satellite boxes. See page 25 for
details.
Channel +/–
Use these buttons to raise or lower the monitor’s volume level. The maximum is the level you
set in Volume Limit. See page 49.
Volume +/–
LCT2065-001B-A ENG.indd 54 LCT2065-001B-A ENG.indd 54 12/18/06 10:11:10 AM 12/18/06 10:11:10 AM