JVC HD-61G587 - Manual (Page 59)

59
Button Functions
When you change the aspect ratios, it is different from their broadcast or recorded program.
Aspect Ratios (Continued)
Press the A SPECT button
• By pressing the A SPECT button, you can change the size.
ASPECT
PANORAMA
CINEMA
FULL
REGULAR
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT PANEL CONTROL screen by using the M
ENU button on
the side of the monitor instead of the remote control. It appears between INITIAL SETUP
and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing Menu† on the side panel and choose a mode by using the M
ENU +/-
buttons ( √ OPERATE ® ).
• If the monitor receives a 16:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the monitor receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the monitor changed it to FULL automatically, the televison will change to the
aspect mode you choosed.
HD (1080i, 720p) SD (NTSC, 480i, 480p)
ASPECT
FULL
REGULAR
PC
LCT2065-001B-A ENG.indd 59 LCT2065-001B-A ENG.indd 59 12/18/06 10:11:12 AM 12/18/06 10:11:12 AM