JVC CA-UXH100 User Manual

Page 21

Advertising
background image

18

You cannot press

(recording) in the following cases:

• If no cassette is inserted.
• If a protected cassette is inserted.

To stop recording for a moment, press

*.

The recording is paused, but the CD playback
does not stop.
To resume recording, press

* again.

To stop recording, press

&/).

The recording stops and the CD playback is
paused.

To remove the cassette, press

&/) while

recording is stopped.

Recording Discs
—Disc Synchronized Recording

You can start disc play and recording at the same time.

On the unit ONLY:

1

Put a recordable cassette in with the exposed
part of the tape down.

• See also page 15.

2

Close the cassette holder gently.

3

Press CD

3/8 to select the CD

player as the source.

4

Press

7 to stop the disc playback.

• If you want to start recording from a

particular track, select the beginning track
using UP

¢ or DOWN 4, then go to the

next step.

• If you want to make a program, perform steps 2 to 4 on

page 13. After making a program, go to the next step.

5

Press

(recording).

The REC indicator appears on the display and
the CD starts playback automatically and the
recording starts.

• When the end of the tape is reached, recording stops and

the CD player is paused.

• If you press

‡ (recording) while playing back the CD, the

CD player returns to the beginning of that track and the
track is recorded on the tape.

REC

CD

#/8

7

17-18_UX-H100[UJ].p65

04.4.26, 3:42 PM

18

Advertising