JVC XV-M50BK - Manual (Page 16)

Getting started
14
Ge
ttin
g s
tarte
d
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details
how to make them active.
• Connect “Y” to “Y,” “P B ” to ”P B ,” “P R ” to “P R ” correctly.
How to make the COMPONENT VIDEO OUT jacks active
Either the COMPONENT VIDEO OUT jacks or the S-VIDEO jack can be active. In the initial (factory preset) condition, the S-
VIDEO jack is active while the COMPONENT VIDEO OUT jacks are not active.
To change the active jack(s) from the initial S-VIDEO to COMPONENT VIDEO, use the following procedure.
7 when the unit is turned on
1 Press and hold down the 7 (STOP) button on the front panel when no disc is inserted or while the unit is stopped.
“S OUT” (the current setting) appears in the display window after a few seconds.
To connect to a TV with the component video input jacks
NOTE
• When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(optional).
PCM / STREAM
OPTICAL COAXIAL
Y P B P R
AV COMPU LINK
LEFT
RIGHT
AUDIO OUT DIGITAL OUT
VIDEO S-VIDEO
VIDEO OUT
COMPONENT
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
Y P B P R
IN
The unit
Green
Blue
Red Component video cable
(not supplied)
Green
Blue
Red
TV
White Red
Audio cable (not supplied)
White
Red
3D-PHONIC
DISC TITLE CHAP.
PROGRAM
EACH
REMAIN
DVD VCD
RANDOM
RESUME REPEAT 1A-B
THEATER
TRACK
(Display window)
M50-ENG.book Page 14 Friday, March 9, 2001 12:00 PM