Jura Capresso X90/X95 User Manual
Page 12
12
11.2 Constant frothing up of milk
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
Ⅲ Put a cup under the pivoting nozzle (20) and press key . Your
milk froths up.
Ⅲ
STEAM INTAKE
Ⅲ When the required amount of froth has been attained push selec-
tor key
anew.
Ⅲ
COFFEE READY
11.3 Drawing off hot milk using the
Profi Auto-Cappuccino/Caffè Latte
The Profi Auto-Cappuccino/Caffè Latte can be used to draw off
hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to
draw off hot milk.
Install the Profi Auto-Cappuccino/Caffè Latte. This is in-
cluded in your Welcome Pack.
11.4 Drawing off cappuccino using the
Profi Auto-Cappuccino/Caffè Latte
The Profi Auto-Cappuccino/Caffè Latte can be used to draw off
capuccino. Adjust the selector lever (1) (Fig. 10) to position (2) to
draw off capuccino.
11.5 Controlling the temperature using the
Profi Auto-Cappuccino/Caffè Latte
Adjust the selector lever (1) to
for hot milk/cappuccino or
for
less hot milk/cappuccino. Individual fine adjustment is possible.
-
+
11.6 Cleaning the
Profi Auto-Cappuccino/Caffè Latte
As soon as you have frothed enough milk, it is important to clean
the Profi Auto-Cappuccino/Caffè Latte.
Fill water in a milk container and immerse the intake-tube in the
water. Now draw off steam until the water/steam mixture flowing
into your cup is completely clean. Your Profi Auto-Cappuccino/
Caffè Latte is clean again.
Remove Profi Auto-Cappuccino/Caffè Latte (21). If you do
not achieve optimum results, disassemble the flow controller
and the selector lever (Fig. 10). Thoroughly rinse these parts
with water.
12. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key
. When the rinsing
water has run into the container, the machine powers down. Dis-
card the water.
13. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
̈ Powder quantity
̈ Coffee temperature
̈ Water quantity
̈ Steam portion
̈ Tea portion