Jura Capresso X90/X95 User Manual
Page 13
13
̈ Filter
̈ Water hardness
̈ Economy mode
̈ Timer clock
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
13.1 Programming powder quantity
Ⅲ Switch the machine on by pressing ON/OFF key
.
Ⅲ Press key
until you can hear an acoustic signal.
Ⅲ
POWDER QUANTITY / SELECT KEY
Ⅲ Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
Ⅲ
POWDER
·········· II ··········
Ⅲ The powder quantity can be selected by pressing keys
or
briefly.
Ⅲ To store the new powder quantity in memory briefly press key .
Ⅲ
POWDER QUANTITY / SELECT KEY.
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.2 Programming coffee temperature
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ Now press the key that you want to programme.
Ⅲ Select the required temperature (high or normal) by activating
key or .
Ⅲ To store the new coffee temperature in memory briefly press key
.
P
-
+
N
+
P
-
+
+
-
P
Ⅲ
TEMPERATURE COFFEE / SELECT KEY
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.3 Programming water quantity
Ⅲ
WATER QUANTITY / SELECT KEY
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Ⅲ
The selected value is confirmed
Ⅲ Now your machine prepares a coffee.
Ⅲ
ENOUGH COFFEE? / PRESS KEY
Ⅲ
OK?
·········· II ··········
Ⅲ When the required water quantity is reached press key . You
can call up the next setting by pressing key
.
Ⅲ There is an additional possibility to alter the water quantity
anew. Press key
or
for this purpose.
Ⅲ If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
briefly to store water
quantity in memory.
Ⅲ By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.4 Programming steam portion
Ⅲ
STEAM PORTION
Ⅲ Press key .
Ⅲ
PORTION /....20 SEC.
Ⅲ By pressing key
or
you can programme time in seconds
(drawing off time of 3 – 250 sec.)
Ⅲ Press key .
Ⅲ
STEAM PORTION
P
-
+
P
N
+
P
-
+
+
P
+
-
P
P
N
+
E