Jensen VM9114 - Manual (Page 19)

15
VM9114
P.VOL Sub-menu Features
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETUP menu, select the
“TS CAL” option.
After entering calibration mode, a crosshair appears in a corner quadrant of
the screen. To begin calibration, touch and hold the crosshair for one second
until it moves to the next quadrant. Continue for each quadrant until the
calibration is completed.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto Run on/off by
choosing the “Demo” option from the SETUP MENU.
When Demo "Auto Run" is Off, you can select "Demo > Run" to start Demo
Mode. Demo scrolls through the various source screens, simulating activity on
the display. “Demo” is discreetly displayed in blue text (below the clock), to
indicate the unit is in Demo Mode. To stop Demo Mode, touch the upper-left
quadrant of the TFT (Source select).
When Demo “Auto Run” is On, the unit will automatically display Demo Mode
when powered on.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, touch the BACK button on
the screen.
Setting Options Function
Source RADIO Choose a source for which you would like to increase the rel-
ative volume (LEVEL).
DISC
USB1
AUX
Level 0-6 Increase relative volume for specified source up to 6 deci-
bels.