JVC FS-A52 - Manual (Page 32)

– 29 –
Recording External Equipment
You can record from external equipment onto a tape.
The external equipment needs to be connected to LINE IN
(AUX) terminal of this unit (for how to connect,
see page 9.)
On the unit ONLY:
1
Insert a recordable cassette into the cassette loading
slot.
• Press TAPE
@ # to adjust the tape direction
to “ ” then
7.
2
Press AUX/MD.
The source is changed to “AUX.”
3
Press MODE select to select a recording mode.
• Each time you press the button, recording mode
changes as follows:
4
Press REC start.
The recording starts.
5
Start playback on the external equipment.
To stop recording, press
7.
To check the clock time while recording from the
external equipment onto a tape
On the remote control ONLY:
Press DISPLAY (not on number buttons.)
• Each time you press the button, the recording
information and the clock time alternate on the display.
To record a single track during play or pause
While playing back you want to record, perform steps 3
and 4.
The playback of the track is stopped, and then starts from
the beginning again. This time, the cassette deck starts
recording the track.
• After the track is recorded, both the CD player and the
cassette deck stop automatically.
To check the clock time while recording from the CD
onto a tape
On the remote control ONLY:
Press DISPLAY (not on number buttons.)
• Each time you press the button, the recording
information and the clock time alternate on the display.
MODE1/2 MODE2/2
Canceled
Ex. When selecting MODE 1/2
Reverse mode
Recording mode
Tape indicator
EN26-29FS-A52[J]f.pm6 02.1.21, 10:58 29