Adjusting the volume, Selecting the sources, Setting the am tuner interval spacing – JVC CA-MXGT700 User Manual

Page 48

Advertising
background image

– 11 –

English

Adjusting the Volume

You can adjust the volume level only while the unit is turned
on.

Turn the VOLUME control
clockwise to increase the volume or
counterclockwise to decrease it.
• The volume level can be adjusted

in 32 steps (VOL MIN, VOL 1 —
VOL 30, and VOL MAX).

When using the remote control, press VOLUME + to increase
the volume or press VOLUME – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.

DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.

To turn down the volume level temporarily

Press FADE MUTING on the remote control.
The volume level gradually decreases to
“VOL MIN.”
To restore the sound, press the button again.

Selecting the Sources

To listen to the radio, press FM/AM. (See page 13.)
To play back CDs, press CD

6. (See pages 14 – 17.)

To play back tapes, press TAPE

3. (See page 18.)

To select the external equipment as the source, press AUX.

When you press the play button for a particular source (AUX,
FM/AM, CD

6, and TAPE 3), the unit turns on (and the

unit starts playing the source if it is ready—COMPU PLAY
CONTROL).

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
• This function works only when the unit is turned off.
• 10 kHz spacing is the initial setting.

On the unit ONLY:

To select 9 kHz, press

STANDBY/ON while holding

down

1 when the unit is in standby mode.

“AM - 9” appears on the display.

To select 10 kHz interval again, press

STANDBY/ON

while holding down

¡ when the unit is in standby mode.

“AM - 10” appears on the display.

AUX

FM
/AM

CD

TAPE

+

STANDBY/ON

STANDBY

+

STANDBY/ON

STANDBY

FADE

MUTING

01-13.MXGT700&G500[UW]8.pm6

02.5.23, 3:46 PM

11

Advertising