Getting started, Connections, Connecting to a tv – JVC DR-M70SEK User Manual

Page 15: Connecting to external equipment, Follow steps 1 and 2 above, Av2 (rear)

Advertising
background image

15

G

ett

ing
S

tarted

EN

Connections

Connecting to a TV

Connect the unit to a TV after considering the
capabilities of your existing equipment.

Before installation, plug off your TV and this
unit.
Using the Scart jack

1

Connect the antenna or cable to the
ANTENNA IN jack of this unit.

2

Connect the ANTENNA OUT jack of
this unit to the Aerial jack of your TV.
Use the supplied RF cable.

3

Connect AV1 (TV) Scart jack of this
unit to the Scart jack of your TV. Use
a commercially available Scart cable
or Scart / RCA cable.

Note

• If your TV does not have a Scart jack, use

commercially available Scart adaptor or Scart / RCA
cable to connect.

Using the S-VIDEO OUT jack and the
ANALOG AUDIO OUT jack

If your TV has an S-Video input jack, use S-Video and
Audio cables to connect.

1

Follow steps 1 and 2 above.

2

Connect S-VIDEO OUT jack of this
unit to the S-Video input jack of your
TV. Use a commercially available
S-Video cable.

3

Connect the ANALOG AUDIO OUT
jacks of this unit to the analogue
Audio input jacks of your TV. Use a
commercially available Audio cable.

Connecting to external equipment

This unit has four input terminals, AV1, AV2 or AV3 on
the rear panel and AV4 on the front panel. Be sure
that all the units are off before making connections.

Recording from a DVD player, VCR or other

Audio-Video equipment with a Scart output

jack (AV2)

Getting Started

IN

OUT

AV2 (DECODER)

AV1 (TV)

ANTENNA

S-VIDEO

OUT

IN

(AV3)

AUDIO IN

(AV3)

ANALOG

AUDIO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

L

L

R

R

COAXIAL

2

3

3

3

1

Cable
Signal

Antenna

or

RF cable
(not supplied)

RF cable
(supplied)

Scart cable (not supplied)

To Aerial jack

Audio/Video cable (not supplied)

Scart/RCA cable
(not supplied)

Scart adaptor
(not supplied)

or

or

Note for a TV with no S-Video input jacks or
Scart jack:
• This unit has no RF modulator, so this type of TV

cannot be used.

IN

OUT

AV2 (DECODER)

AV1 (TV)

ANTENNA

S-VIDEO

OUT

IN

(AV3)

AUDIO IN

(AV3)

ANALOG

AUDIO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

L

L

R

R

COAXIAL

AUDIO IN

S-VIDEO IN

R

L

S-Video cable
(not supplied)

Audio cable
(not supplied)

IN

OUT

AV2 (DECODER)

AV1 (TV)

ANTENNA

S-VIDEO

OUT

IN

(AV3)

AUDIO IN

(AV3)

ANALOG

AUDIO OUT

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

L

L

R

R

COAXIAL

AV output jack
(Scart)

Scart cable (not supplied)

AV2 (Rear)

E6851BD_EN.book Page 15 Tuesday, August 2, 2005 5:57 PM

Advertising
This manual is related to the following products: