John Lewis JLBIOS661 - Manual (Page 22)

2. Then unhook the rails at the back.
1
2
To clean the shelf support rails, soak in warm
soapy water and remove stubborn marks with
a well wetted soap impregnated pad. Rinse
well and dry with a soft cloth.
Fitting the shelf support rails
1. Reattach the rails at the back.
2. Put them into position at the front and
press them into place.
1
2
Replacing the Oven Light
Warning! Before replacing the oven
light disconnect the appliance from the
electrical supply.
If the oven bulb needs replacing, it must
comply with the following specifications:
• Electric power: 15 W/25 W,
• Electric rate: 230 V (50 Hz),
• Resistant to temperatures of 300°C,
• Connection type: E14.
These bulbs are available from your local
Repair agent.
To replace the faulty bulb:
1. Ensure the oven is disconnected
from the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
22