JVC XV-522SL - Manual (Page 45)

Additional information
42
Additional information
XV-521BK/XV-523GD [B] EN
LVT0435-004A
English
Français
AV COMPU LINK remote control system
When you buy a separate TV, VCR, DVD player, receiver, or other component and
connect them to each other, you have to operate each component individually. JVC’s
AV COMPU LINK remote control system meets the demands of a system made up of
single components and has the ease of operation of a single unit.
Connection and setup
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
• If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as
follows.
• When connecting to VIDEO-1 input terminal of the television: DVD2
• When connecting to VIDEO-2 input terminal of the television: DVD3
• If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and
DVD player’s AV COMPU LINK setting as follows.
• When connecting to VIDEO-1 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
• When connecting to VIDEO-2 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
• If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK
setting to DVD1.
• The DVD player’s AV COMPU LINK setting is operated in the SYSTEM page of the preference display.
See page 38 for operation.
• For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions.
DVD player
TV
To AV COMPU LINK (II or EX)
VCR (Video Cassette Recorder)
To AV COMPU LINK
Receiver
TV
To AV COMPU LINK (II or EX)
DVD player
DVD player
TV
To AV COMPU LINK (II or EX)