JVC CA-UXS59 - Manual (Page 18)

14
Receiving FM Stations with RDS
Radio Data System (RDS) allows FM stations to send an
additional signal along with their regular program signals.
• When tuned to an FM station which provides the RDS
service, the RDS indicator lights on the display.
This System can receive the following types of RDS signals.
To show the RDS information
While listening to an FM station...
• While receiving an RDS signals, sometimes the frequency
information will appears after clock information.
Searching for a Program by
PTY Codes
You can locate a particular kind of program from the preset
channels (see page 9) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to an FM station...
2
Select a PTY code.
PS (Program
Service) Shows commonly known
station names.
PTY (Program
Type) Shows types of broadcast
programs.
RT (Radio Text) Shows text messages the station
sends.
Enhanced Other
Networks Provides the information about
the types of the programs
broadcast by the RDS stations
of the different networks.
Remote control
RDS DISPLAY
/DISPLAY
TA/News/Info
PTY
SELECT +/–
PTY SEARCH
Remote
ONLY
PS Station names is displayed. “NO PS” will
appear if no signal is sent.
PTY The broadcast program type is displayed. “NO
PTY” will appear if no signal is sent.
RT Text messages the station sends is displayed.
“NO RT” will appear if no signal is sent.
NEWS O AFFAIRS O INFO O SPORT O EDUCATE
O
DRAMA
O
CULTURE
O
SCIENCE
O
VARIED
O
POP M
O
ROCK M
O
EASY M
O
LIGHT M
O
CLASSICS O OTHER M O WEATHER O FINANCE
O
CHILDREN
O
SOCIAL
O
RELIGION
O
PHONE IN
O
TRAVEL
O
LEISURE
O
JAZZ
O
COUNTRY O NATION M O OLDIES O FOLK M O
DOCUMENT
O
back to the beginning
Remote
ONLY
PTY
SEARCH
PTY
SELECT +
PTY
SELECT –
Advanced Radio Operations
5_AdvancedRadio.fm Page 14 Tuesday, March 8, 2005 3:16 PM