JVC CA-UXS59 - Manual (Page 23)

19
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with music, etc.
• You can store three Daily Timer settings; however, you can
activate only one of Daily Timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 Timer, Daily 2 Timer, or Daily 3 Timer.
To be continued...
STANDBY/ON
SET
CANCEL
CLOCK/
TIMER
PRESET UP,
PRESET DOWN
Remote control
How Daily Timer actually works
Once the Daily Timer has been set, the timer ( )
indicator and timer number indicator (1, 2, or 3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the specified disc.
• When selecting “P – – –,” the last tuned station will be
selected for Daily Timer.
About one hour after turning on the System, the System
stops it, and turns off (stands by) automatically.
• While Daily Timer is working, the timer (
) and
timer number indicator (1, 2, or 3) flash on the display.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
Remote
ONLY
CLOCK
/TIMER
Clock setting
(see page 13)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
1
REC
Ex.: When Daily Timer 1 setting mode is selected
7_Timer.fm Page 19 Wednesday, February 16, 2005 5:46 PM