JVC KD-LX10R - Manual (Page 5)

5
ENGLISH
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 29.
1
Turn on the power.
The display illuminates and the control panel comes out.
2
Select the source.
Each time you press the button, the source changes as follows:
=
FM
=
DAB tuner**
=
CD*
=
CD changer** or
External component** = AM = (back to the beginning)
To operate the tuner, see pages 6 – 18.
To operate the CD player, see pages 19 – 23.
To operate the CD changer, see pages 41 – 44.
To operate the external component, see page 45.
To operate the DAB tuner, see page 46 – 51.
Notes:
*
If a CD is not in the loading slot, you cannot select CD as the source to play.
** Without connecting the equipment and set “EXT INPUT” correctly (see page 33), you
cannot select it as the source to play.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 24 – 28).
To drop the volume in a moment
Press SOURCE (ATT) for more than 1 second while listening to any source. “ATT” starts
flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button for more than 1 second again.
To turn off the power
Press and hold OFF/ 0 until “SEE YOU” appears on the display.
1 2 3
Volume level meter
Equalization pattern (see page 24)
EN02-05.LX10R[E]/F 00.1.12, 6:31 PM 5