John Lewis JLBIUCF 01 - Manual (Page 9)

Before carrying out any work, remove the plug from
the power socket.
Grid preparation
Left door opening:
Remove the left side (A) of the grid cutting it from
the rear (see figure).
Right door opening:
Remove the right side (B) of the grid cutting it from
the rear (see figure).
To position the grid on the appliance proceed as
follows:
Apply the grid to the base of the appliance by
pushing on to the clasps (a) until they click.
Building in the appliance
under a worktop
The dimensions of the recessed installation area
must correspond with those indicated in the figure.
DO002/2
A
B
DO001
a
a
DO013
600
550
min.
600
Installation kit
1. Two cabinet securing brackets are supplied with
the installation pack.They need to be assembled
onto the cabinet prior to cabinet being pushed
into the Kitchen aperture.
- To fit these brackets remove the two screws at
the top left and right hand front corners of the
cabinet.
- Position the two brackets as shown in the figure
and replace the two securing screws.
1xA
2xD
1xB 2xC
2xL
2xE
18xI
2xF
2xG
1xK
1
Left hand bracket Right hand bracket
2
9
Building In