JVC Ceiling Recessed Bracket WB-S625U - Manual (Page 3)

Removing a Ceiling Recessed Bracket
Attaching a Ceiling Panel
Attach the ceiling panel (supplied) to the 2 hooks
on the Ceiling Recessed Bracket.
Camera
Hooks
(2 locations)
Ceiling Panel
Ceiling
1.
Remove the Ceiling Panel.
Pull down the Ceiling Panel and disengage the 2 hooks
either side.
2.
Dismount the camera unit from the Ceiling
Recessed Bracket.
To dismount, reverse the procedures for “Attaching the Cam-
era” in the camera’s “INSTRUCTIONS” section.
3.
Dismount the Ceiling Recessed Bracket from
the ceiling.
1
Loosen the clamping screws (3 locations) while support-
ing the Ceiling Recessed Bracket. Upon ensuring that the
clamping bracket has been dismounted from the ceiling,
lower the Ceiling Recessed Bracket until the stopper comes
into contact with the ceiling.
2 To remove the stopper from the ceiling, push the stop-
per release lever upwards using a screwdriver while sup-
porting the Ceiling Recessed Bracket.
3 Support the tilted Ceiling Recessed Bracket and remove
it from the ceiling.
Ceiling Panel
Hooks
(2 locations)
Push
Upwards
Stopper
Stopper
release lever
2
3
Clamping screw
(3 locations)
Screw driver
1
1.
3.
WB-S625U_LWT0270-001A-K 05.3.18, 10:45 AM 3