JVC LPT0719-001A - Manual (Page 18)

18
Setting the Video Channel / Setting the language
To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
NOTES:
• If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
• If no buttons are pressed for more than
60 seconds,the MENU screen will
retur n to nor mal TV operation
automatically.
• Both the VCR and the DVD have their
own menu options (See page 36).
1
Press POWER to turn on the DVD/VCR.
2
Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to
select the VCR mode. The VCR indicator on the front panel
will light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
3
Set the 3/4 Channel selector switch on the rear panel to CH
3 or 4.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 3.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
Setting the Video Channel
Setting the language
3
Press SETUP MENU,
If you use the unit for the first time
and press SETUP MENU, instead
of the main menu screen on the
right the SYSTEM SET UP menu
screen in step 2 may appear.
Press or to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2
Press or to select the
“LANGUAGE” option, then press
ENTER.
4
Press SETUP MENU until the MENU screen is cleared.
á +/-/ENTER/MENU ñ
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SET UP
SYSTEM SET UP
〈 +/-/ENTER/MENU 〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
ON OFF
ON OFF
DAYLIGHT SAVING TIME
TV/VCR CH +
TV VCR DVD
POWER
DVD MENU MARKER RETURN OPEN/
CLOSE
DISPLAY A.TRK C.RESET ZERO RETURN
SUB TITLE ANGLE SEARCH
MODE
SP/EP
PLAY
MODE ZOOM TITLE REPEAT
A-B
TV
POWER
INPUT
TV VOL
0 TIMER TV/VCR
REW
PLAY
FF
REC
STOP
PAUSE
SKIP
/INDEX
SKIP
/INDEX
TV/VCR CH —
SET SET ENTER/
SELECT
SET UP
MENU CANCEL
OSD
A.MONITOR
SLOW SKIP
SEARCH
2B00401BE(16-21) 22/5/2002, 17:16 18