JVC LPT0719-001A - Manual (Page 30)

30
3
Instant Timer Recording (ITR)
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
Set the TV/CATV option to the appropriate position (See page
19).
1
2
Press SP/EP to select the desired tape
speed SP or EP.
The tape counter and SP or EP will
appear on the screen for about 4
seconds.
4
TV - VHF/UHF channels
CATV - CABLE TV channels
The Instant Timer Recording
feature provides a simple and
convenient way to make a timed
recording.
Press Number keys or VCR CH +/– to
select the channel to be recorded.
5
NOTE:
If you wish to watch the DVD playback
during the ITR, press DVD to change to
DVD mode and perform the DVD play-
back (see P.37).
Example: Instant Timer Recording for 30 minutes.
Press REC on the VCR or while holding REC, press PLAY on
the Remote to begin recording. Press REC on the VCR again to
stop recording after 30 minutes. Each additional press of REC
will increase recording time as shown in the chart below, up to a
maximum of 5 hours. The ITR and recording time will appear on
the screen for about 4 seconds. And, REC will keep blinking in
the display.
Press STOP or turn off the power.
" " will appear on screen for about 4
seconds.
To cancel ITR
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
NORMAL REC
Recording time Press
6 times
7 times
8 times
9 times
Recording time
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
CH 110
CH 125
INDEX
ITR 0 : 30
00 : 00 : 00 SP
TV/VCR CH +
TV VCR DVD
POWER
DVD MENU MARKER RETURN OPEN/
CLOSE
DISPLAY A.TRK C.RESET ZERO RETURN
SUB TITLE ANGLE SEARCH
MODE
SP/EP
PLAY
MODE ZOOM TITLE REPEAT
A-B
TV
POWER
INPUT
TV VOL
0 TIMER TV/VCR
REW
PLAY
FF
REC
STOP
PAUSE
SKIP
/INDEX
SKIP
/INDEX
TV/VCR CH —
SET SET ENTER/
SELECT
SET UP
MENU CANCEL
OSD
A.MONITOR
SLOW SKIP
SEARCH
VCR/DVD/TV
2B00401AE(28-33) 21/5/2002, 9:47 30