John Lewis JLBIOS608 - Manual (Page 41)

41
Cleaning and care
1
Warning: First switch off the appliance
and let it cool down before carrying out
any cleaning.
Warning: For safety reasons, do not clean
the appliance with steam blasters or high-pres-
sure cleaners.
Attention: Do not use any corrosive
cleaning fluids, sharp objects or stain re-
movers.
Do not clean the glass oven door with abra-
sive fluids or metal scrapers, which could
scratch the surface. The glass could crack and
shatter.
Outside of the appliance
• Wipe the front of the appliance with a soft
cloth and a solution of hot water and wash-
ing up liquid.
• For metal fronts, use normal commercially
available cleaning agents.
• Please do not use scouring agents and abra-
sive sponges.
Oven interior
1
Warning: When cleaning, no oven
functions must be selected and the
oven must have cooled down.
Cleaning
The catalytic coated walls are self-cleaning.
They absorb splashes of fat whilst the oven is
operating.
To aid this self-cleaning process, we recom-
mend that you heat up the oven at regular in-
tervals without placing food inside.
1. The oven light will switch on automatically
when the oven door is opened.
2. Remove all slide-in parts from the oven.
3. Wipe the floor of the oven clean with warm
washing-up solution and dry.
4. Set the oven temperature to 250°C.
5. After an hour, switch off the oven.
6. Wipe away any remaining grime with a
damp, soft sponge.
1
Caution! Do not use oven spray or
abrasive cleaning agents. Do not use
soap or other cleansing agents. The cat-
alytic sheeting may otherwise be dam-
aged.
3
After long periods of use, the catalytic
coating may become slightly discol-
oured. This has no effect on the catalyt-
ic properties.
Accessories
Wash all slide-in units (shelf unit, baking tray,
shelf support rails etc.) after each use and dry
well. Soak briefly to make them easier to
clean.