How to make the component video out jacks active – JVC XV-M512SL User Manual

Page 19

Advertising

Getting started

ing sta

rte

English

You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details
how to make them active.

• Connect “Y” to “Y,” “P

” to ”P

,” “P

” to “P

” correctly.

How to make the COMPONENT VIDEO OUT jacks active

Either the COMPONENT VIDEO OUT jacks or the S-VIDEO jack can be active. In the initial (factory preset) condition, the S-
VIDEO jack is active while the COMPONENT VIDEO OUT jacks are not active.
To change the active jack(s) from the initial S-VIDEO to COMPONENT VIDEO, use the following procedure.

7 when the unit is turned on

Press and hold down the

7 (STOP) button on the front panel when no disc is inserted or while the unit is stopped.

“S out” (the current setting) appears in the display window after a few seconds.

Keep holding down the

7 (STOP) button on the front panel.

After a few more seconds, “C out” replaces “S out” in the display window.
Now the COMPONENT VIDEO jacks are active and the S-VIDEO jack is not active.

• To change the active jack(s) from the COMPONENT VIDEO to the S-VIDEO jack, use the similar procedure.

To connect to a TV with the component video input jacks

NOTE

• When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack

(optional).

OFF

AUDIO OUT

ATTENUATOR

VIDEO S-VIDEO

COMPONENT

AV COMPU LINK

NTSC

PAL

VIDEO OUT

SELECT

VIDEO OUT

OPTICAL

PCM / STREAM

COAXIAL

DIGITAL OUT

VIDEO

AUDIO

RIGHT

LEFT

S-VIDEO

The unit

Component video cable
(not supplied)

Green

Blue

Red

White

Red

Audio cable (not supplied)

White

Red

Green

Blue

Red

3D-PHONIC

DISC

TITLE

CHAP.

PROGRAM

EACH
REMAIN

DVD VCD

RANDOM
RESUME

REPEAT 1A-B
THEATER

TRACK

(Display window)