JVC XV-M512SL - Manual (Page 20)

Getting started
18
Get
ti
ng star
ted
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL or COAXIAL) to the
digital input of an amplifier, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
To connect to an audio amplifier or receiver
To connect to audio equipment with a digital input
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”
setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
“DIGITAL AUDIO OUTPUT” on page 54.
• With the digital connection, the COMPRESSION setting in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
Amplifier or receiver
Audio cable
(not supplied)
White
Red
The unit
White Red
OFF ON
AUDIO OUT
ATTENUATOR
L
R
VIDEO S-VIDEO Y P B P R
COMPONENT
AV COMPU LINK
NTSC PAL
VIDEO OUT SELECT
VIDEO OUT
OPTICAL PCM / STREAM COAXIAL
DIGITAL OUT
AUDIO
RIGHT
LEFT
IN
Digital equipment
Audio cable
(not supplied)
White
Red
The unit
White Red
Coaxial digital cable
(not supplied)
Optical digital cable
(not supplied)
OFF ON
AUDIO OUT
ATTENUATOR
L
R
VIDEO S-VIDEO Y P B P R
COMPONENT
AV COMPU LINK
NTSC PAL
VIDEO OUT
SELECT
VIDEO OUT
OPTICAL PCM / STREAM COAXIAL
DIGITAL OUT
AUDIO
RIGHT
LEFT
IN
OPTICAL
COAXIAL
DIGITAL
IN
When using the DIGITAL OUT (OPTICAL)
jack, remove the protection cap. Do not
lose the removed cap. When the DIGITAL
OUT (OPTICAL) jack is not used, fix the
protection cap into the jack.
P.16-22-eng.fm Page 18 Friday, July 19, 2002 9:04 PM