Spot exposure control white balance adjustment – JVC GR-D347U User Manual

Page 29

Advertising
background image

EN

29

FEATURES FOR RECORDING

MasterPage: Start_Right

ADV

ANCED FEA

TURES

Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.

1

Set the Power Switch to “REC”.

2

Set the recording mode to “

M”.

(

pg. 13)

3

Press BACKLIGHT twice so that the Spot

Exposure Control indicator “

” appears.

● A spot metering area frame appears at the

centre of the LCD monitor/viewfinder.

4

Press 2 or 1 to select the desired spot

metering area frame.

5

Press SET.

● Spot Exposure Control is engaged.

● Exposure is adjusted to make the brightness of

the selected area most appropriate.

To lock the iris

After step

4, press and hold SET over 2

seconds. The “

” indication appears and the iris

is locked.

To cancel Spot Exposure Control

Press BACKLIGHT once so that the “

indicator disappears.

NOTES:

÷ You cannot use the Spot Exposure Control at the

same time with following functions.

16:9” in “WIDE MODE”

(

pg. 26)

“STROBE” in “EFFECT” (

੬ pg. 31)

Digital Zoom (

੬ pg. 18)

● Depending on the shooting location and condition,

optimum result may not be attained.

The white balance refers to the correctness of
color reproduction under various lighting. If the
white balance is correct, all other colors will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional color/
tint reproduction.

To change the setting
Set “W.BALANCE” in FUNCTION Menu.
(

੬ pg. 23)

● The selected mode indicator except “AUTO”

appears.

[AUTO]: White balance is adjusted
automatically.

MWB

: Adjust the white balance manually

when shooting under various types of lighting.
(

੬ pg.30, “Manual White Balance Adjustment”)

FINE

: Outdoors on a sunny day.

CLOUD

: Outdoors on a cloudy day.

[ ] = Factory-preset

To return to automatic white balance
Set “W.BALANCE” to “AUTO”. (

੬ pg. 23)

Spot Exposure Control

White Balance Adjustment

GR-D347US_EN.book Page 29 Wednesday, July 12, 2006 3:51 PM

Advertising