Audio and system preference, Progressive mode, Digital audio output – JVC XV-F80BK User Manual

Page 53

Advertising
background image

Initial settings

51

In

it

ial s

e

tti

ng

s

English

PROGRESSIVE MODE

You can select the
progressive mode from the
following options.

AUTO

The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.

VIDEO 1

Suitable for playing back a video source disc with
static (inactive) pictures.

VIDEO 2

Suitable for playing back a video source disc with
dynamic (active) pictures.

FILM

Suitable for playing back a film or progressive source
disc.

SMART

Used to playback a disc containing both video and
film source materials.

* Normally, set the PROGRESSIVE MODE to “AUTO”.
* Some DVD VIDEO discs may not be played back

correctly with the “AUTO” mode. If the playback
picture is unclear or noisy with a particular DVD

VIDEO disc, try to change the mode.

The

PREFERENCE 2

display handles preferences

related to audio and system.

DIGITAL AUDIO OUTPUT

To connect the unit’s digital
output to an external device
equipped with a digital
input, this item must be set
correctly.

PCM ONLY

Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.

• STREAM/PCM

Should be selected when you connect with the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.

• DOLBY DIGITAL/PCM

Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.

The following chart shows the relationship between
types of playback discs and output signals.

* With some DVD VIDEO discs that are not fully copy-

protected, a 20 or 24 bit digital signal may be output.

NOTE

• When playing back a film-source DVD VIDEO disc with

the “PROGRESSIVE MODE” set to “FILM”, “SMART” or
“AUTO” and the progressive scan mode is active, the
PROGRESSIVE indicator on the front panel lights in
green.
(See page 17.)

Audio and system preference

PREFERENCE2

PREFERENCE1

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE

ENGLISH

ON SCREEN GUIDE

ON

MONITOR TYPE

PRESS

KEY

PROGRESSIVE MODE

AUTO

4:3 LB

PREFERENCE2

PREFERENCE1

DIGITAL AUDIO OUTPUT

STREAM/PCM

DOWN MIX

Lo/Ro

COMPRESSION

ON

AUTO STANDBY

OFF

SCREEN SAVER

PRESS

KEY

MODE 1

AV COMPULINK MODE

DVD 1

Playback discs

Output

STREAM/
PCM

DOLBY
DIGITAL/
PCM

PCM ONLY

DVD with 48/44.1
kHz, 16 bit linear
PCM

48/44.1 kHz,
16 bit, stereo
linear PCM

+

+

DVD with 48/44.1
kHz, 20/24 bit
linear PCM

48/44.1 kHz,
16 bit, stereo
linear PCM*

+

+

DVD with 96/88.2
kHz, linear PCM

No output

+

+

DVD with DTS

DTS bitstream 48 kHz, 16 bit,

stereo linear
PCM*

+

DVD with Dolby
Digital

Dolby Digital
bitstream

+

48 kHz, 16 bit,
stereo linear
PCM*

Video CD

44.1 kHz,
16 bit, stereo
linear PCM

+

+

Audio CD

44.1 kHz,16
bit,
stereo linear
PCM

+

+

Audio CD with DTS DTS bitstream 44.1 kHz,

16 bit, stereo
linear PCM

+

CD -R with MP3

No output

+

+

NOTES

• The unit does not provide the DTS decoding function.

• When playing a DVD VIDEO or Audio CD disc with DTS,

use a DTS decoder to get correct signals from your
speakers.

)(1*ERRN 3DJH  7KXUVGD\ -XO\    $0

Advertising