JVC XV-F80BK - Manual (Page 54)

Initial settings
52
Init
ial
s
e
tti
ng
s
DOWN MIX
To playback a DVD VIDEO
disc recorded with
surround multichannel
audio correctly, the DOWN
MIX setting must be
properly made according to
your audio system.
Note that this setting affects
only the output signal from the ANALOG AUDIO output
jacks when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
• Lt/Rt
Should be selected when you enjoy multichannel
surround audio by connecting the unit’s ANALOG
AUDIO output to a surround decoder.
• L 0 /R 0
Should be selected when you enjoy conventional 2-
channel stereo audio by connecting the unit’s AUDIO
output to a stereo amplifier/receiver or television set,
or when you duplicate audio of a DVD VIDEO disc
recorded with surround audio to your MD, cassette,
etc.
COMPRESSION
The compression function
suppresses the dynamic
range of 2-channel audio
output signals. This function
is always active when
playing back a 5.1-channel
source.
• ON
The compression function is always active regardless
of sources.
• OFF
The compression function is inactive when playing
back a one- or two-channel source.
AUTO STANDBY
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters
standby mode automatically.
• 60
Time is set to 60 minutes.
• 30
Time is set to 30 minutes.
• OFF
The auto standby function is off.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The “screen saver” picture
appears and its brightness
changes.
• OFF
The screen saver function is off.
AV COMPULINK MODE
If you use the AV COMPU
LINK system, you must set
this item correctly.
Select from the three options:
“DVD1”, “DVD2” and “DVD3”
according to the equipment to
be connected.
See page 56.
NOTE
• The Down mix function does not work when the 3D
PHONIC function is activated.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE DVD1
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE DVD 1
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE DVD1
NOTE
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• When a static picture is displayed for a long time
during playback, the screen saver function is always
activated in “MODE 1” regardless of whether you select
“MODE 1” or “MODE 2”.
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE DVD1
PREFERENCE2 PREFERENCE1
DIGITAL AUDIO OUTPUT STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE DVD1
)(1*ERRN 3DJH  7KXUVGD\ -XO\     $0