John Lewis JLDW 1225 - Manual (Page 27)

Technical data
Dimensions Width 596 mm
Height 850 mm
Depth 597 mm
Water supply pressure Minimum 0.5 bar (0.05 MPa)
Maximum 8 bar (0.8 MPa)
Electrical connection Information on the electrical connection (voltage, overall power
and fuse) is given on the rating plate on the inner edge of the
appliance door.
Capacity Place settings 12
Installation
Warning! It is dangerous to alter
the specifications or attempt to
modify the appliance in any way.
Warning! This appliance is heavy.
Care should be taken when moving
it.
Warning! Care must be taken to
ensure that the appliance does not
stand on the electrical supply cable.
Warning! Any electrical or
plumbing work required to install this
appliance must be carried out by a
qualified electrician or plumber.
Unpacking
• Remove all packaging before positioning
the appliance.
• Position the appliance next to a water tap
and a drain.
Fitting under the kitchen
worktop
By removing the worktop of the appliance ,
you can install it under the kitchen worktop
or a close fitting sink. The dimensions of the
recess must correspond to those shown in
the picture.
27