Jwin JX-CD477 - Manual (Page 5)

E.4
1. Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display.
2. Press the skip button (
) to select the first track to be programmed.
3. Press the PROGRAM button again to enter the track into the memory.
4. Repeat steps 2 to 3 to program other track till you finish.
5. After programming is finished, press the PLAY/PAUSE Button.
“PROG” shows steady in the display and programmed play begins.
6. The player stops automatically after all programmed tracks have been played.
To play the same program again, press the PLAY/PAUSE Button.
The programming will be cleared if
1. Open the door
2. Power off
3. After random play
4. To check the program, press the STOP Button and then the PROGRAM button.
SINGLE TRACK REPEAT
Press the CD Mode button once during play, and the “ 1 ” will appear in the display.
The current track will be played over and over again until Stop button is pressed.
ALL TRACKS REPEAT/CONTINUOUS PLAY
Press the CD Mode button twice during play. And the “ ALL” will appear in the display.
The all tracks on disc will be played over and over again until Stop button is pressed.
INTRO PLAY
Plays the first 10 seconds of all tracks once, then stops.This is useful if you do not
remember the song titles.
1. Press the CD Mode button till the ‘INTR’ appear in the display.
2. The first 10 seconds of the tracks will be played once, then stops.
3. To stop the intro play and start the normal play. Press the CD Mode button twice
more or press the stop button.
Note: If you press the button during playing, it will start the intro play after the songs finished.
RANDOM OR SHUFFLE PLAY
Plays all the tracks in random order.
1. Press the CD Mode button 4 times when the unit is the standby mode.
2. The “RAND” will appear in the display. Then press PLAY/PAUSE button to stop play.
3. The display will show the first track the CD player select.
4. Press the skip button to skip the next random song.
5. To stop the function, press the CD Mode button once more or press the Stop button.
THE HOLD FUNCTION
It is useful during playing, the function will lock the key on the panel to protect the
mistake during playing.
During playing slide the HOLD switch to ‘ON’ position, the ‘HOLD’ will appear in the dis-
play, the key on the panel will be locked, the panel keys are disabled. Slide the HOLD
switch to ‘OFF’ position to stop the function.
THE CD MODE BUTTON
This button can be pressed during play to accomplish many different kinds of play.
Once for single track repeat.
Twice for all tracks repeat.
3 times for INTRO play.
4 times for RANDOM (SHUFFLE) play.
5 times for return to normal play.
CD Mode button pressed