JVC CA-MXDK1 - Manual (Page 6)

3
Connections
• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may cause
a monitor problem when playing back a copy-protected
disc. You may also have a monitor problem when
connecting the player to an integrated TV/Video system.
Do not connect the AC power cord until all other
connections have been made. Supplied Accessories
• FM antenna (1)
• AM loop antenna (1)
• Composite video cord (1)
• Remote control (1)
• Batteries (2)
• AC plug adaptor (1) (not supplied for the Middle East
and Australia)
If any item is missing, consult your dealer immediately.
~
From AM/FM antenna
See page 4.
!
From the digital input of digital audio
component such as CD recorder, etc.
See page 4.
Ÿ
From the video input of TV/monitor
See page 4.
@
From subwoofers (CA-MXDK5 and
MX-DK3)
See page 5.
$
To a wall outlet
Plug in the AC power cord only after all connections are complete.
• Before plugging in, confirm the position the voltage selector points
to. See page 6 and the back cover.
• If the wall outlet does not match the AC plug, use the supplied AC
plug adaptor (not supplied for the Middle East and Australia).
* The illustration above is for CA-MXDK5.
‹
Voltage Selector
Before plugging in, confirm the position
the voltage selector points to. See page 6
and the back cover.
#
From main speakers
See page 5.
¤
From surround speakers
See page 5.
⁄
From auxiliary equipment
See page 4.
MX_DK5_3_1.book Page 3 Tuesday, February 7, 2006 11:49 AM