JetAudio iAUDIO U2 - Manual (Page 36)

iAUDIO U2
36
Advanced Operations
General
Skip Length
Track
Scan Speed
x 2
Resume
On
Auto Play
On
Charge
Normal
Slow
Off
General
1. Skip Length
• Set the skip time when moving the lever to , .
• You can select Track / 2 / 3 / 4 / 5 / 10 / 15 / 20 / 30 sec.
2. Scan Speed
• Set the scan speed when moving and holding the lever to , .
• You can select x1 / x2 / x4 / x8 / x16.
3. Resume
• When Resume is On, iAUDIO starts playback from the last played position
after it has been stopped or paused.
• You can switch it On/Off.
4. Auto Play
• When Auto Play is On, iAUDIO starts playing after it powers on.
• You can select On or Off.
5. Charge
• Set the charging mode when iAUDIO is conntected to PC through USB cable.
• You can select Normal / Slow / Off.
It is recommended that you use Slow mode to avoid overload. PC may be
unstable when Normal mode is used.