JetAudio iAUDIO U2 - Manual (Page 41)

iAUDIO U2
41
Troubleshooting
Symptom Troubleshooting Explanation
The power does not
come on.
Check if the Hold switch is On.
Try again after turning the Hold
switch off.
iAUDIO does not operate with the
Hold switch On.
Check if the same phenomena
occurs even after connecting AC
adaptor / USB cable.
iAUDIO does not work if the bat-
tery is weak.
There is no sound. Check if the music files are stored
in iAUDIO.
iAUDIO does not start playback if
there is no music files.
Check if the Hold switch is On.
Try again after turning the Hold
switch off.
iAUDIO does not operate with the
Hold switch On.
FM radio does not work. FM reception may be poor and you may not be able to hear FM radio
clearly depending on where you are, such as inside a building or a mov-
ing car. In addition, listening to the radio may become impossible in some
areas. Please try to listening at different locations.
If FM radio does not work where reception should be possible, there may
be a problem in the reception module. In this case, please contact our
service center.
Characters on LCD are
abnormal.
Change the language setting in the Language menu of iAUDIO, and try
again.
The capacity of flash
mem is different or
reduced.
(For example, 256MB is
displayed for 242MB)
Some of the flash memory in iAUDIO is used for system area essential
for normal operation of iAUDIO. Therefore, the actual available capacity
of the flash memory is somewhat reduced after excluding the system
area. For example, with a 256MB product, about 242MB of memory is
available for user area (for data/music files), and it is normal.