Jensen JiMS-60 - Manual (Page 10)

9
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press and hold the
ALARM SET button. The display will change from current time to wake up time.
Release the ALARM SET button to return to current time.
WAKE TO iPod
1. Turn on the unit, slide the FUNCTION selector to “iPod/AUX” position, dock
your iPod onto the unit to play, adjust the volume level that you wish to hear
when the wake up time is reached, then slide the WAKE UP SOURCE
selector to the “iPod/Radio” position. The ALARM indicator will light up.
2. Reconfirm the wake up time setting by pressing the ALARM SET button and
then turn off the unit.
3. At the selected wake up time the iPod will turn 'On' and will play for about
two hours and then shut off automatically.
4. To stop the iPod, press the ALARM SET button. The iPod will stop but the
alarm remains set and will turn the unit on again at the same time on the
following day.
5. If you do not want the alarm to turn the unit on the following day, set the
WAKE UP SOURCE selector to the “ALARM OFF” position. The Alarm
Indicator will go off.
Note: If you select wake to iPod, please make sure your iPod is docked properly,
otherwise, the iPod will not play when preset alarm time is reached.
WAKE TO RADIO
1. Turn on the unit, slide the FUNCTION selector to “AM” or “FM” position, tune
to the radio station you preferred, and adjust the volume level that you wish
to hear when the wake up time is reached, then slide the Wake Up Source
Switch to the “iPod/RADIO” position. The ALARM indicator will light up.
2. Reconfirm the wake up time setting by pressing the ALARM button and then
turn off the unit.
3. At the selected wake up time the radio will turn 'On' and will play for about
two hours and then shut off automatically.
4. To stop the radio, press the ALARM SET button. The radio will stop but the
alarm remains set and will turn the unit on again at the same time on the
following day.
5. If you do not want the alarm to turn the unit on the following day, set the
WAKE UP SOURCE selector to the “ALARM OFF” position. The ALARM
indicator will go off.
WAKE TO ALARM
1. Set the WAKE UP SOURCE selector to the “ALARM” position. The ALARM
indicator will light up to confirm that the alarm is set.
2. At the selected wake up time the alarm will sound and will continue for about
two hours and then shut off automatically.