Using the remote controller, Installing the battery, English – JVC KD-S723R EN User Manual

Page 27

Advertising
background image

ENGLISH

27

This section is only for KD-S871R.

This unit can be remotely controlled as instructed
here (with an optionally purchased remote
controller.)
We recommend that you use remote
controller RM-RK31 or RM-RK50 with your unit.

(Ex.: When you are using RM-RK31)

Before using the remote controller:
• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no
obstacle in between.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting.)

Installing the battery

When the controllable range or effectiveness of the
remote controller decreases, replace the battery.

1.

Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point
pen or a similar tool.

2) Remove the battery holder.

1)

2)

USING THE REMOTE CONTROLLER

2.

Place the battery.

Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in
the holder.

Lithium coin battery
(product number:
CR2025)

3.

Return the battery holder.

Insert again the battery holder pushing it until
you hear a clicking sound.

(back side)

WARNING:

• Store the battery in a place where children cannot

reach.
If a child accidentally swallows the battery,
consult a doctor immediately.

• Do not recharge, short, disassemble or heat the

battery or dispose it in a fire.
Doing any of these things may cause the battery to
give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.
Doing this may cause the battery to give off heat,
crack or start a fire.

• When throwing away or saving the battery, wrap it

in tape and insulate; otherwise, the battery may
start to give off heat, crack or start a fire.

• Do not poke the battery with tweezers or similar

tools.
Doing this may cause the battery to give off heat,
crack or start a fire.

(back side)

MO

TP/PTY

SEL

DISP

8

7

9

Remote sensor

CAUTION:

DO NOT leave the remote controller in a place (such
as dashboards) exposed to direct sunlight for a long
time.

EN27-28KD-S871R[E]f.pm5

14/12/01, 7:29 PM

27

Advertising