JVC KD-S723R EN - Manual (Page 5)

5
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 6 – 16.
To operate the CD,
see pages 17 – 19.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 20 – 22.)
To drop the volume in a moment
Press briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold for more than one second.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 23.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a disc
and adjust it as required during playback.
To increase the volume.
A M
F M
C D
To decrease the volume.
1 3 2
SEL
TP/PTY
DISP
SSM
¢
4
SCM MODE 7 8 9 10 11 12 RND RPT MO
CD
FM
AM
Volume level appears.
Volume level indicator
(see page 25)
EN05-05KD-S871R[E]f.pm5 14/12/01, 7:25 PM 5