Basic operations, Turning on/off the unit, Inserting and removing discs – JVC XV-D721BK User Manual

Page 22

Advertising
background image

Basic operations

XV-D721BK[J, 1U]EN
LET0486-001B

19

Basic

operations

Basic operations

In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.

Turning on/off the unit

Press POWER on the front panel or POWER on the remote control unit.

• You can turn on the unit by pressing the

3 button on the front panel

or the remote control unit. In this operation, the unit starts playback
when the disc is set.

• You can also turn on the unit by pressing the OPEN/CLOSE button on

the front panel or the remote control unit. In this case, the disc tray
opens.

• Even if you press the POWER button to turn off the unit, the unit is not disconnected from the AC power source as long as it is

connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of
power.

Inserting and removing discs

1

Press OPEN/CLOSE to open the disc tray.

2

Place the disc in the tray.

3

Press OPEN/CLOSE to close the disc tray.

The unit reads the disc information and the corresponding opening display (depending on the disc type) appears
on the TV screen.

• To insert an 8-cm disc, place it

in the inner recess.

With the label side up

• With some DVD Video discs, the unit starts playback automatically after inserting the disc.

• The unit can playback DVD Audio, DVD Video, Audio CD, and Video CD discs only. Do not load other disc types. For details

about playable disc types, see page 12.

• If you insert a DVD Video disc whose region code does not match the unit, “REGION CODE ERROR!” is shown in the DVD

opening display. For detail about the region code, see page 12.

• When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the

tray is closed or the disc may not be removed from the unit.

• Do not use any stabilizer when playing back a disc.

You can also open and close the disc tray from the opening display.

Use CURSOR

5/∞ to move

to

, then press ENTER to open or close the disc tray.

NOTE

NOTES

POWER

POWER

DOLBY

D

I G

I T

A

L

STA

ND

BY

POWER

XV

-511 D

VD

PLA

YE

R

DISC

TITLE

CHAP

RESUME

EACH

THEATER

Advertising