GE RM84930 - Manual (Page 7)

7
/.
/&&
TV
SETUP
Write your codes down here for easy
reference later.
Direct Code Entry
1. Press and hold the
SETUP
button until
the red indicator stays on, then release
the
SETUP
button.
. Press and release the desired device
button ( TV , VCR , etc.). The red indicator
blinks, then stays lit.
3. Enter the 3 digit code
from the code tables
(on separate sheet).
Note: after a valid
code entry, the red
indicator turns off. For
an invalid code, the
red indicator flashes.
4. With your device on, press
ON/OFF
.
If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.
Device Device stored Code
TV TV
CBL/SAT
VCR
DVD/AUX
1 2 3
4 5 6
7 8 9