Code search – GE RM84930 User Manual

Page 8

Advertising
background image

8

/. /&&

Code Search

If your device does not respond after you have
tried all the codes for your brand, or if your brand is
not listed, try searching for your code by following
these steps.

1. Manually turn on the device (

TV

,

VCR

, etc.) to

be controlled.

. Press and hold the

SETUP

button

until the red indicator stays on, then
release the

SETUP

button.

3. Press and quickly release the desired

device button (

TV

,

VCR

, etc.). The red

indicator blinks off once.

4. Press the

ON-OFF

button repeatedly

(up to 300 times) until the device
to be controlled turns off. The red
indicator blinks off with each button
press.

Most users will store VCR codes under the VCR button,
Cable codes under CABLE, etc. If (for example) you
want to store a VCR code under DVD/AUX, first follow
the procedure for Direct Code Entry (previous page) and
press DVD/AUX in step  of Direct Code Entry, then
enter ANY VCR code in step 3 of Direct Code Entry.
Then follow the steps above for Code Search.

Note: Code Search starts from the currently stored
three digit number under that mode. Sometimes the first
code that “works” with your device may only allow limited
functionality (e.g. the MENU button might not work).
There may be a code that performs more functions.
Continue the code search process until the best code
is found.

. Press and release

ENTER

to install

the code.

TV

SETUP

ENTER

Advertising