JVC DR-MH20SUJ - Manual (Page 70)

Filename [DR-MH30UJ_10Subsidiary.fm]
Masterpage:Left+
70
EN
SUBSIDIARY SETTINGS
Page 70 Monday, 12 July 2004 14:10
The VCR Plus+ programing system assigns a VCR Plus+ guide
channel to the TV channels and the cable channels. These guide
channel numbers are also called the VCR Plus+ channel codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates correctly, it is
necessary to set the “VCR Plus+ Guide Channel” for each station.
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for cable
and broadcast TV stations DO NOT match the channel number on
which it is received by your unit or cable box. Check your TV listing,
or contact your cable supplier for details.
● Many TV stations can be viewed on cable. Check your TV listing, or
contact your cable supplier for details.
Guide Channel Number Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select “INITIAL SET UP”, then press t.
3
Press w e to select “TUNER
SET”, then press t.
4
Press rt w e to select “GUIDE
CH SET”, then press ENTER.
5
Press rt to select “GUIDE CH”,
then press ENTER.
6
Press rt to select the Guide
Channel number for the desired
station as shown in the TV listings.
Then press ENTER.
● To change the Guide Channel
number in 10 increments, press and
hold rt.
● If you receive your channels with a cable box and if you have properly
set your Controller, “CABLE CH” appears in place of “HDD/DVD CH”.
If not, perform “Cable Box and/or DBS Receiver Control Setting”
(
੬ pg. 24).
7
Press rt to select “HDD/DVD CH”, then press ENTER. Press
rt to select the number of the unit’s channel position on which
the Guide Channel Number’s broadcast is received by the unit or
the DBS receiver. Then press ENTER.
● To timer-record a satellite program with the VCR Plus+ system, you
need to install the provided Satellite Controller and perform the
procedure described in “Cable Box and/or DBS Receiver Control
Setting” (
੬ pg. 24).
● Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
Changing VCR Plus+ ® Setting
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
rtwe
ENTER
SET UP
CABLE/DBS
DVD TV
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
13 12 11
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
STB SET UP
AUTO CH SET
GUIDE CH SET
MANUAL CH SET
TUNER SET UP CLOCK SET UP
DVD VIDEO SET UP INITIAL SET UP FUNCTION SET UP HDD/DVD SET UP
13 12 11
PRESS [SET UP] TO EXIT
ENTER
SELECT EXIT
SET UP SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > GUIDE CH SET
CABLE CH
GUIDE CH
- -
1
RETURN
DR-MH30UJ_00.book Page 70 Monday, July 12, 2004 3:17 PM