JVC DR-MH20SUJ User Manual

Page 77

Advertising
background image

Masterpage:Right+

EN

77

Filename [DR-MH30UJ_10Subsidiary.fm]

TROUBLESHOOTING

Page 77

Monday, 12 July 2004 14:10

● An invalid PlusCode number has been input. (੬ pg. 46)

● To set the timer program using the VCR Plus+ system, the

Guide Channel Number must be set in advance. (

੬ pg. 70)

● Appears when you tried to input a PlusCode number during

timer recording or instant timer recording.

● A disc loaded cannot be played back on this unit since the region

number of the disc does not match that of the unit. (

੬ pg. 8)

● When an incompatible disc is loaded, 4 has been pressed.

(

੬ pg. 8)

● Formatting is not complete since the disc may be dirty or

damaged. Take out the disc, clean it and retry. (

੬ pg. 11, 71)

● Finalizing is not complete since the disc may be dirty or

damaged. Take out the disc, clean it and retry. (

੬ pg. 11, 72)

● Cancelling disc finalization is not complete since the disc may be

dirty or damaged. Take out the disc, clean it and retry. (

੬ pg. 11,

72)

● During Live Memory playback, 8 has been pressed. (੬ pg. 44)

● Timer recording has finished during Live Memory playback.

● Timer recording finished during Live Memory playback, then the

next timer recording is about to begin while playback continues.

● An attempt has been made to record copy-protected contents.

● An attempt has been made to record copy-once contents on a

disc that is not CPRM compatible, such as DVD-R.

● The unit has detected invalid contents at the start or in the

middle of playback.

● An attempt has been made to start DV dubbing when a digital

video camera is not properly connected to the unit.

● Check the connection. (੬ pg. 60)

PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY

GUIDE CHANNEL IS NOT SET
SET GUIDE CHANNEL THEN RETRY

CAN NOT SET VCR PLUS TIMER PROGRAMING DURING TIMER
RECORDING OR INSTANT TIMER RECORDING

REGION CODE ERROR
CHECK DISC

UNREADABLE DISC
CHECK DISC

COULD NOT FORMAT THE DISC
CHECK THE DISC

CAN NOT FINALIZE THIS DISC

CAN NOT CANCEL FINALIZATION
OF THIS DISC

PRESS [STOP] AGAIN TO STOP RECORDING

TIMER RECORDING COMPLETED

PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START

COPY PROHIBITED
CAN NOT RECORD

COPY PROHIBITED
CAN NOT PLAY

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON

DR-MH30UJ_00.book Page 77 Monday, July 12, 2004 3:17 PM

Advertising
This manual is related to the following products: