John Lewis JLBIOS663 - Manual (Page 10)

10
“End of cooking” function
With this function, you can set the oven to switch off
automatically when a programmed end of cooking
time is over. Place food in the oven, select a cooking
function and adjust the cooking temperature. Press
button Time functions repeatedly to select the
“End of cooking” function. The relevant pilot lamp
will start flashing. Then, proceed as follows:
To set the end of cooking time:
1. Press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “End of cooking” pilot lamp will
come on and the display will revert to the time
of day.
3. When cooking time is over, the oven will be
switched off automatically and an acoustic alarm
will be heard, and the pilot lamp will start
flashing. Turn the oven function and the
thermostat control knob to zero.
To switch off the acoustic alarm, press any
button. NOTE: turning the acoustic alarm off
will reset the oven to manual, and if the oven
function and the thermostat knobs are not set
to zero the oven will start to heat again.
To cancel the end of cooking time:
1. Press button Time functions repeatedly to
select the “End of cooking” function. The
relevant pilot lamp will flash and the display
will show the programmed End of cooking time.
2. Press button “ ” until the display shows the
current time of day. The programmer will beep
and the pilot lamp will go out.