John Lewis JLBIOS663 - Manual (Page 8)

8
Electronic Programmer
4
5
1 2 3
6
7
8
The oven will only work if the time of
day has been set.
However, the oven can also be operated
without any programme.
Setting the time of day
When the power supply is switched on, or after a
power failure, the “Time” pilot lamp will flash on the
display.
To set the correct time of day:
1. Press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “Time” pilot lamp will go out and
the display will show the set time. The
appliance is ready for use.
To reset the correct time of day:
1. Press button Time functions repeatedly to
select the “Time” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The time of day can only be reset if no automatic
function (cooking duration or end of cooking)
has been set.
In the event of a power failure, all the
settings (time of day, programme setting or
programme in operation) will be cancelled.
When the power is restored, the numbers
in the display will flash, and the clock/timer
has to be reset.
1. “Time functions” control button
2. Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute timer” pilot lamp
8. “Time” pilot lamp