Jacuzzi J-SHA - Manual (Page 9)

J-Sha II Owner's Manual
5
Water Supply
Consult local authorities for plumbing code requirements in your area.
IMPORTANT: Proper installation of the fill spout plumbing and compliance with local codes are the
responsibility of the installer. Jacuzzi Whirlpool Bath does not warrant connections of water supply fittings
and piping, fill systems, or drain/overflow systems. Nor is it responsible for damage to the bath which occurs
during installation.
CAUTION: A nonflammable protective barrier must be placed between soldering work and bath unit to prevent
damage to the bath.
21-1/2"
Plumbing
Pump, jets, and suction fittings for the whirlpool system are factory plumbed in a combination of metric and schedule
40 PVC piping. All Jacuzzi Whirlpool Bath products are factory tested for proper operation and watertight connections
prior to shipping.
Before securing the bath to the floor, a test should be made for possible water leaks. Fill the bath until the nozzles
on the back rest are covered. If leaks are detected, notify your Jacuzzi Whirlpool Bath Dealer. Do not install the unit.
BACK REST NOZZLES