JVC FSSD1000CA - Manual (Page 11)

7
Getting Started
English
FS-SD1000(UB, US, UW, UY) / LVT0685-002A / English
Connecting the Powered Subwoofer (SP-PW1000)
&RQQHFWýDýVLJQDOýFRUGýõVXSSOLHGôýEHWZHHQýWKHý6\VWHP’Vý68%:22)(5ýWHUPLQDOýDQGýWKHý/()7о0212э,1387ýWHUPLQDOýRIýWKH
3RZHUHGý6XEZRRIHUï
Attaching the Spacers
Attach the supplied spacers to the bottom of the powered subwoofer (SP-PW1000) to protect the cabinet, prevent slipping,
and absorb the cabinet vibration. Peel off the backing from a spacer and attach it.
Connecting External Equipment
Connect signal cords (not supplied) between the System’s MD/AUX-OUT/IN terminals and the output/input terminals of the
external MD recorder, tape deck, etc.
You can then listen to the external source through the System or record the System’s CD player or tuner to the external unit.
Connecting an MD Recorder, etc (Digital Output)
Unplug the cap and connect an optical digital cord (not supplied) between the System’s CD DIGITAL OUT terminal and the
input terminal of the MD recorder, etc.
You can record the digital output signal from the System’s CD Player to the MD recorder, etc.
SUB WOOFER
*
Powered Subwoofer
Signal cord 11mm Max.
* Use the plug whose diameter is 11mm or less.
Spacer
SUB WOOFER CD DIGITAL OUT
ANTENNA
AM EXT FM(75 )
COAXIAL
AM LOOP
OUT IN
MD / AUX
*
*
Signal cord (not supplied)
MD recorder or tape deck
(not supplied)
Pin-plug x 2
Pin-plug x 2
Signal cord (not supplied)
Stereo mini-plug
Stereo mini-plug
* Use the plug whose diameter is 11mm or less.
11mm Max.
11mm Max.
CD DIGITAL OUT
*
MD recorder, etc. (not supplied)
Optical digital cord (not supplied)
Cap
* Use the plug whose diameter is 11mm or less.
11mm Max.
FS-SD1000_01E.book Page 7 Wednesday, May 9, 2001 10:30 AM