Timer recording manually – JVC HR-XV1EK User Manual
Page 29
29
SELECT :
TIMER REC SET
START
DATE 23 FRI
END
SET
EXIT
:
: MENU
CH
SPEED
19:30
3
LP
PDC
OFF
OK : OK
21:30
Note:
• When the power supply is interrupted for
more than 30 minutes, the preset
programme is cleared. In this case, you
have to set the timer again.
• If you want to set the timer with the PDC
function, see "To record with the PDC
system" on page 28.
The built-in timer allows unattended
recording of up to 8 programmes
within 1 month.
Preparation
• Turn on the TV and select the VCR channel on TV.
• Make sure TV/VCR/DVD switch has been slided to VCR/
DVD. Then press VCR to select the VCR mode. (The VCR
indicator will light)
• Load a video cassette with the erase prevention tab intact.
Make sure that the time and date are correct.
Example: Timer recording for the 23rd, Friday, on channel 3,
19:30 to 21:30 and LP mode.
1
2
3
4
Set the desired dates with
or
. Then press
▼
to accept them.
Set the Starting time (19:30), ending time (21:30)
channel (3) and tape speed (LP) in the same way as in
step 3.
Press SET UP MENU.
Press
▲
or
▼
to select
the TIMER REC SET.
Then press OK.
Each line stands for one
programme of the 8
memories. Select one
line with
▲
or
▼
.
Then press OK.
• Daily/weekly settings
can be found by
pressing
or
repeatedly (see page
30).
• In case of an error,
press
▲
to go back to
the previous step and
repeat.
Timer Recording Manually
SELECT :
TIMER REC SET
START
DATE 23 FRI
END
EXIT
: MENU
CH
SPEED
:
11:30
1
SP
PDC
OFF
SET
:
:
:
:
:
:
:
:
:
:
:
SELECT : / OK
EXIT : MENU
:
:
:
:
:
:
SELECT :
CHANNEL SETUP
ENTER
EXIT
: OK
: MENU
VCR SETUP
AUTO REPEAT
OFF
SYSTEM SETUP
TIMER REC SET
2A77501B E(24-29)
5/30/02, 9:23 PM
29